NON-PRESSURIZED SOLAR WATER HEATER
rely on the natural convection of warm water rising to circulate water through the glass evacuated tubes and to the tank.
Siema Products & Solutions
01
02
NON-PRESSURIZED SOLAR WATER HEATER:
rely on the natural convection of warm water rising to circulate water through the glass evacuated tubes and to the tank, which is located above the tubes. As water in the evacuated glass tubes heats, it becomes lighter and rises naturally into the tank above. Meanwhile, the tank's cooler water below flows down tubes to the bottom , causing circulation throughout the system.
Brief Specification:
● Inner tank: is made of stainless steel SUS304/SUS316; thickness: 0.5 mm - 0.6 mm,or stainless steel SUS304/SUS316; thickness: 0.5 mm - 1.2 mm or galvanized steel - G90; thickness: 2 mm.
● Outer tank: Pre-painted galvanized steel/ aluminum-zinc coated or powdered coated galvanized steel, 0.5-0.4mm.
● Insulation: polyurethane 60-50mm thickness.
● Vacuum tube: QB-AL-N/AL, 1800-58.
● Frame: coated galvanized.
Download Product Profile
NON-PRESSURIZED SOLAR WATER HEATER
Stable and reliable performance and well wind resistance
03
STEEL Solar water tank:
● The tank is made of stainless steel SUS 316/304 which belongs to food grade and have better resistance to corrosion.
● The tank is non-pressurized, it should always be opened to meet the atmosphere pressure.
● The tank should always be filled with water to avoid any damage to the tank.
04
main feature:
● Stable and reliable performance and well wind resistance
● Vacuum heat-collecting tubes at high temperature
● Dual-purpose brackets for both flat and inclined roof
● Meeting the demand of well-to-do families
● Economical goods
trusted by:
SUBSCRIBE TO OUR NEWSLETTER
NAVIGATION
contacts
BUSINESS HOURES
